SANS Type 63 and Type 66 Flexible Trailing Cables
Our Mining cable portfolio includes the South African standard Type 63 and Type 66 flexible trailing cables.
SANS Type 63 and Type 66 Cable Specification
Ethylene Propylene Rubber (EPR) insulated and with a Polychloroprene Rubber (CR) inner and outer sheathed both bonded together for additional torsional protection, these flexible cables are designed for trailing applications, including reeling applications. They are laid up as 3 phase cores each with a nylon and tinned copper braid, alongside unscreened pilot core(s).
Flexible trailing cables such as the Type 63 and 66 cables are for opencast mining machinery including medium sized draglines, section feeders, shovels and drills. Also suitable for portable equipment, including those used in hazardous areas.
SANS Type 63 and Type 66 Voltage Ratings
The Type 63 cables have a rated voltage of 1.9/3.3kV. The Type 66 cables have a voltage rating of 3.8/6.6kV.
They are of similar construction (but different voltages) to the Type 41 and 61 (low voltage) and Type 611, 622 and 633 cables which are higher Medium Voltages.
All cables offer good resistance to sunlight, UV radiation, and oils as well as being resistant to abrasions- all factors demanded of cables in the challenging environment of open cast and sub-surface mining operations.
SANS Type 63 and Type 66 Cable Datasheets
Our technical datasheets provide key electrical characteristics and information for installation, including pulling tensions and bend radius. Where additional information is required for cable selection, please contact the team with your enquiry.
Our mining industry specialists can provide support in specification of cables for dynamic and static equipment, and for infrastructure - please contact the team for more information.
Construction Table
SANS Type 63 1.9/3.3kV cable
|
SANS Type 66 3.8/6.6kV Cable
|
|
|---|---|---|
| VOLTAGE | 1.9/3.3kV | 3.8/6.6kV |
| CONDUCTOR | Class 5 flexible stranded tinned annealed Copper | |
| INSULATION | EPR (Ethylene Propylene Rubber) | |
| BRAID | Nylon /Tinned copper wires | |
| PILOT CORES | Unscreened | |
| LAY | Three tinned copper/nylon braid screened power cores and one unscreened pilot core laid up in the right hand lay around rubber (RD1) filler centre | |
| INNER SHEATH | CR (Polychloroprene Rubber) | |
| REINFORCEMENT BRAID | Open nylon braid - minimum 16 strings | |
| OUTER SHEATH | CR (Polychloroprene Rubber) | |
SANS Type 63 and Type 66 Flexible Trailing Cables
YOUR CABLE OPTIONS
Use the FastQuote filters to find the exact cable specifications you need.
Need a bespoke solution? Learn more about customised cables.
| Product name | Part No | Cores | Nominal cross-sectional area (mm²) | Sheath colour | Length (m) | |
|---|---|---|---|---|---|---|
| SANS Type 63 1.9/3.3kV cable | B6B3025/3010 | 3 | 25mm² | Black | ||
| SANS Type 63 1.9/3.3kV cable | B6B3035/3010 | 3 | 35mm² | Black | ||
| SANS Type 63 1.9/3.3kV cable | B6B3050/3010 | 3 | 50mm² | Black | ||
| SANS Type 63 1.9/3.3kV cable | B6B3070/3016 | 3 | 70mm² | Black | ||
| SANS Type 63 1.9/3.3kV cable | B6B3095/3016 | 3 | 95mm² | Black | ||
| SANS Type 63 1.9/3.3kV cable | B6B3120/3016 | 3 | 120mm² | Black | ||
| SANS Type 63 1.9/3.3kV cable | B6B3150/3025 | 3 | 150mm² | Black | ||
| SANS Type 63 1.9/3.3kV cable | B6B3185/3025 | 3 | 185mm² | Black | ||
| SANS Type 63 1.9/3.3kV cable | B6B3240/3025 | 3 | 240mm² | Black | ||
| SANS Type 66 3.8/6.6kV Cable | B6C3025/3025 | 3 | 25mm² | Black | ||
| SANS Type 66 3.8/6.6kV Cable | B6C3035/3025 | 3 | 35mm² | Black | ||
| SANS Type 66 3.8/6.6kV Cable | B6C3050/3025 | 3 | 50mm² | Black | ||
| SANS Type 66 3.8/6.6kV Cable | B6C3070/3025 | 3 | 70mm² | Black | ||
| SANS Type 66 3.8/6.6kV Cable | B6C3095/3025 | 3 | 95mm² | Black | ||
| SANS Type 66 3.8/6.6kV Cable | B6C3120/3025 | 3 | 120mm² | Black | ||
| SANS Type 66 3.8/6.6kV Cable | B6C3150/3025 | 3 | 150mm² | Black | ||
| SANS Type 66 3.8/6.6kV Cable | B6C3185/3025 | 3 | 185mm² | Black | ||
| SANS Type 66 3.8/6.6kV Cable | B6C3240/3025 | 3 | 240mm² | Black |